Zimmer Biomet GPS III Processing Instructions page 9

Step 1: Load Plasma
Plasmax® Plus: Unscrew yellow cap on port No.
1 of plasma concentrator and fill with 25 ml of
PPP. Replace cap. Remove and discard protective
cover on tethered white cap. Screw white cap onto
port No 1.
*Plasmax® Regular: Fill with 15 ml of PPP.
Note:
Refer to GPS ® III instructions for how to process PRP and PPP.
Spin paddle by hand until plasma is fully mixed into
beads. Mixing is complete when the white beads are
completely saturated with plasma.