Thank you for choosing Elegance Screens. Please read this manual carefully before installing your new screen. Please ensure that your projector is installed correctly and is projecting from the right distance. Read the manual and follow the instructions to ensure optimum performance from your screen.
Tools required Warning Read and follow all instructions and warnings in this manual. Keep future reference. Ignore the safety warnings may lead to injuries and/or damaging the product. Please contact your local dealer for repairs or maintenance. Please contact our company if you have any further questions.
Control Methods Automatic control - 12V Trigger ( Kanvas Pro only) Connect the 12V trigger cable directly to your projector as shown on the right. Power on your projector and your Elegance Screen should now automatically drop. If it does not,...
Infrared control External IR control Controller will work within 30 degrees away horizontally from the center of the receiver point within 9 meters from the screen. The controller will not work if the signal is covered by something. Keep the controller away from high temperature and humidity. Please change the battery when the signal is low.
Page 10
Adjusting the Screen Length Limits B Upward Adjustment A Downward Adjustment This is a factory setting limit and + = anticlockwise recommend that it is not altered. Use to increase material drop 1 full revolution will increase the drop by *We only recommend that an experienced AV approximately 25 mm (depends on the installers undertake these procedures.
30 screws with anchors. Product Product Frame Product Material Concerto 2 years 1 year Symphony 2 years 1 year Kanvas 2 years 1 year Kanvas Pro 1 year 1 year Quantum HDR 2 years 1 year Horizon 1 year 1 year...
Need help?
Do you have a question about the KANVAS and is the answer not in the manual?
Questions and answers