Thank you for choosing Elegance Screens. Please read this manual carefully before installing your new screen. Please ensure that your projector is installed correctly and is projecting from the right distance. Read the manual and follow the instructions to ensure optimum performance from your screen.
Tools required Warning Read and follow all instructions and warnings in this manual. Keep future reference. Ignore the safety warnings may lead to injuries and/or damaging the product. Please contact your local dealer for repairs or maintenance. Please contact our company if you have any further questions.
Prepare Installation Start by cutting a hole in your false ceiling as shown below. A is the total length of the casing including end cover plate. Length of cut-out will be A-20mm while width of cut- out is 95mm for any size of casing. (Please refer to images 1 and 2 below) Measure and mark the place of fixing brackets as shown below.
Installation Attach the threaded mounting rod to the ceiling bracket on the top and bottom of the bracket using the nuts and washers provided. Attach the bracket to the ceiling in the desired location. It is highly recommended that you provide your own ceiling screws and other hardware that suits your mounting method.
Power Connection Radio frequency control - Please change the battery when the signal is low. - Please remove the battery from the remote control when the controller is not being used for a long period of time. - Please use the same type of battery as originally suppied.
30 screws with anchors. Product Product Frame Product Material Concerto 2 years 1 year Symphony 2 years 1 year Kanvas 2 years 1 year Kanvas Pro 1 year 1 year Quantum HDR 2 years 1 year Horizon 1 year 1 year...
Need help?
Do you have a question about the HORIZON and is the answer not in the manual?
Questions and answers