Selecting the Frequency Range
1.
Press and hold the Set button until the green Frequency Band LED begins to flash.
2.
Use the Set button to click through the five bands of frequency range options.
3.
When the LED stops flashing, the illuminated range is selected.
RF Power Overload
When the Overload Antenna Indicator displays a red LED, it indicates that a strong RF signal is overloading the antenna ampli-
fier. To correct an overload condition, increase the distance between the antenna and transmitter, or lower the antenna gain
setting.
Warning: Overloading the antenna amplifier results in reduced channel count and poor system performance.
Optional Accessories
1/2 Wave Omnidirectional Receiver Antenna for improved wireless signal reception
In-Line RF Amplifier compensates for signal loss over extended cable runs
Multiple UA845UWB Setup
Shure Incorporated
UA8
UA834
8/12