Table of Contents
Advertisement
To enable the DC bias voltage:
1.
Hold the SET button down and turn the unit on.
2.
Release the SET button when the 2 red LEDs turn on.
3.
Power cycle the unit.
4.
DC bias voltage is enabled when the frequency range LED illuminates. (LEDs do not flash after power cycle when en
abling the DC bias voltage.)
Specifications
Carrier Frequency Range
Band 1
Band 2
Band 3
Band 4
Band 5
Distributed Output Level (Gain)
0 dB, typical
Receiver Antenna Input, Output Ports1 to 4
Receiver Antenna Input, Cascade Output
Output Connector Isolation
>25 dB, typical
Third-order Overload Intercept Point (OIP3)
24 dBm, typical
Input-Output AC Line Voltage, Switched
100 to 240 V AC, 50/60 Hz
DC Output
15 V DC, 4 Connectors
Output Current
Combined total from all DC outputs
174 to 216 MHz
470 to 960 MHz
1240 to 1260 MHz
1492 to 1525 MHz
1785 to 1805 MHz
Shure Incorporated
-2 dB to +2 dB
-1 dB to +1 dB
10/12
Advertisement
Table of Contents
