Table of Contents
Advertisement
5. UTCO (User TOC) Deleting Procedure
If "UTCO ERROR" or other message is displayed when inserting recorded disk and the UTCO needs to be deleted, follow
this procedure.
1)
Insert the disk whose UTOC is to be deleted.
2)
Use the B.SKIP button and F.SKIP button to move the pickup to the center of the disk.
3)
Press the MD MODE button to display "SELECT GRV".
4)
Press the MD REC button to display "REC Analog"
5)
Press the PLAY button to display "FOCUS ON!".
6)
Press the ENTER button to display "ALL SV ON".
7)
Press the TAPE REC/REC MUTE button to display "UTOC ERASE".
8)
After deleting the UTOC, the display automatically returns to "ALL SV OFF".
7. Initializing Procedure of EEP-ROM
Follow the procedure given below to set the adjustment value of EEP-ROM to the default value (reference value).
1)
While pressing the CD OPEN/CLOSE button, press the MD EDIT button of the unit.
2)
After turning on the power again, confirm that "NO Adjust" is displayed.
*
Even in the "NO Adjust" state, the MD can be operated.
20
Advertisement
Table of Contents
