Download Print this page

KEUCO Royal Reflex.2 Instructions For Use Manual page 4

Hide thumbs Also See for Royal Reflex.2:

Advertisement

US
Important information, please read!
Technical specifications
– Supply voltage:
– Max. power consumption:
Prod. No.:
24204 171351:
24205 171351:
– Protection category:
– Ambient conditions:
Temperature
– Light colour
Installation dimensions, refer to page 2
Included items, refer to picture 1 on page 6
Connection diagram, refer to picture 2 on page 6
The product can be operated in two ways.
Operating mode 1 (condition as supplied):
Light on/off on rotary dimmer of the product
(automatically off after power reinstated).
Operating mode 2:
Light on/off on external light switch (automatically on
after power reinstated).
To toggle the operating mode, press and hold the
rotary dimmer 15 seconds while the light is switched
off. The light turns on briefly to confirm the change to
the operating mode.
Lighting modes
The product has 3 different lighting modes.
Mode 1: Front illumination
Mode 2: Washbasin illumination
Mode 3: Front and washbasin illumination
Press the rotary dimmer for at least one second to
change the lighting modes.
Installation, refer to picture 3 on page 6
Operation, refer to picture 21 on page 11
Note: When switching off the lights, the type of
lightning and its intensity are saved and will be the
same after switching on the lights again.
For spare parts with order numbers, refer to pages 14
and 15.
The light sources may only be replaced by the
manufacturer, its customer service or by an equally
qualified person.
For information about warranty and maintenance, see
the enclosed Maintenance and Warranty Passport.
Disposal information! Equipment with this labelling
must not be disposed of in household refuse, but must
be disposed of at a collection centre intended for this
purpose.
4
230 V AC / 50 Hz
Width
Weight
38-3/4''
61,73 lb
(1000 mm)
(28 kg)
51-3/16''
77,16 lb
(1300 mm)
(35 kg)
41° – 104° F
3000 Kelvin
CA
Informations importantes, à lire impérativement !
Consignes de sécurité
AVERTISSEMENT !
Light
32 W
40 W
ATTENTION !
IP20
NOTICE
Explication des symboles
Mise en garde contre les risques d'électrocution
Mise en garde contre les risques liés à l'eau
Locaux intérieurs
Remarque, conseil ou renvoi
Montage correct/contrôle fonctionnel
Montage incorrect
Respecter le détail de montage
Option/accessoires
Interrupteur Marche/Arrêt
Éclairage frontal et mural
Éclairage de la vasque
Couleur de la lumière blanc lumière du jour (blanc
froid)
Couleur de la lumière blanc chaud
Informations de sécurité importantes
AVERTISSEMENT !
Symbole de sécurité indiquant
un danger avec des risques de
moyenne intensité !
Le non-respect peut entraîner la mort
ou de graves blessures.
Symbole de sécurité indiquant un
danger avec de faibles risques !
Le non-respect peut entraîner des
blessures légères ou moyennement
graves.
Symbole de sécurité indiquant un
danger avec de faibles risques !
Le non-respect peut entraîner
des endommagements ou une
détérioration du produit.
Danger de mort en cas de non-
respect de la documentation !
Afin de réduire les risques de
blessures causées par des incendies,
des brûlures ou par une électrocution,
veuillez impérativement suivre
les consignes de sécurité et les
instructions indiquées dans la notice
de montage.

Advertisement

loading