Cd Operation; Playing A Disc; Selecting A Different Track; Finding A Passage Within A Track - Philips MC145/98 User Manual

CD Operation

IMPORTANT:
The lens of the CD player should never be
touched.

Playing a disc

This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
¶ CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Select CD source.
2
Lift the disc door at the edge
marked OPEN•CLOSE to
open the CD compartment.
➜ OPEN is displayed when
you open the CD
compartment.
3
Insert a disc with the printed side facing up and
press down on OPEN•CLOSE to close the
CD door.
➜ rEAd is displayed as the CD player scans
the contents of a disc. The total number of
tracks and the total playing time are also shown.
12
Press 2; to start playback.
4
➜ Current track number followed by elapsed
playing time of the track are displayed during disc
playback.
➜ Press DISPLAY/CLOCK to display total
remain playing time.
To pause playback press 2;. Press 2; again to
5
resume play.
➜ Display: The elapsed time flashes when
playback is paused.
To stop disc playback, press 9.
6
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER.
– you select standby.
– you press the tape deck PLAY 2 key.

Selecting a different track

● Press ¡1 or 2™ once or repeatedly until the
desired track number appears in the display.
● Press 2; to start playback.

Finding a passage within a track

Press and hold down ¡1 or 2™ .
1
➜ The disc is played at high speed and low
volume.
2
When you find the passage you want, release
¡1 or 2™ .
➜ Normal playback continues.