Table of Contents
Advertisement
General Information/Maintenance
Supplied accessories
– A/V cord (R/W/Y)
– FM wire antenna
– External video box
– Power cord
– 15-pin D-Sub cable
– Stand
– Remote Control and two AAA batteries
– This instruction booklet and a quick start guide
Environmental information
Any unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Care and safety information
Avoid high temperatures, moisture,
water and dust
●
Do not expose the system, batteries or discs to
humidity, rain, sand or excessive heat (caused by
heating equipment or direct sunlight).
●
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
●
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
●
The apparatus shall not be exposed to dripping
or splashing.
Avoid condensation problem
●
The lens may cloud over when the player is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the player in the warm environment until
the moisture evaporates.
10
Do not block the vents
●
Do not operate the system in an enclosed
cabinet and allow about 10 cm (4 inches) of free
space all around the player for adequate
ventilation.
●
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers table-cloths, curtains, etc.
Cleaning the cabinet
●
Use soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning discs
●
To clean a CD, wipe it in a
straight line from the center
towards the edge using soft and
lint-free cloth. A cleaning agent
may damage the disc.
●
Write only on the printed side
of a CDR(W) and only with a
soft felt-tipped pen.
●
Handle the disc by its edge. Do not touch the
surface.
Finding a suitable location
●
Place the player on a flat, hard, stable surface.
●
Install this unit near the AC outlet and where the
AC power plug can be reached easily.
Advertisement
Table of Contents
