Table of Contents
Advertisement
Tape Operation/Recording
Tape playback
1
Select TAPE source.
➜
Display shows
2
Open the tape key flap marked
"OPEN•CLOSE" on the front panel.
3
Press down STOP•OPENÇ0 to open the
tape door.
4
Insert a recorded tape and close the tape door.
●
Load the tape with the open side downward and
the full spool to the left.
5
Press PLAY 2 to start playback.
●
The key is automatically released at the end of a
tape, except if PAUSE; has been activated.
6
To pause, press PAUSE;. Press again to resume.
7
By pressing à or á on the system fast winding
of tape is possible in both directions.
8
To stop the tape, press STOP•OPENÇ0.
34
throughout tape operation.
General information on
recording
●
For recording, use only NORMAL (IEC type I)
tapes on which the tabs have not yet been
broken. This deck is not suitable for recording on
METAL (IEC IV) type tapes.
●
The best recording level is set automatically.
Altering the VOLUME, INCREDIBLE
SURROUND or DBB will not affect the
recording in progress.
●
At the very beginning and end of the tape, no
recording will take place during the 7 seconds
when the leader tape passes the recorder heads.
●
To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.
●
The making of unauthorized copies of copy-
protected material, including computer
programmes, files, broadcasts and sound
recordings, may be an infringement of copyrights
and constitute a criminal offence. This equipment
should not be used for such purposes.
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Advertisement
Table of Contents
