Notes On The Assembly And Installation Instructions; Qualifications; Notes On Remote Control Units; Depiction - weinor BiConnect BiRec On/Off Assembly And Installation Instructions Manual

Notes on the assembly and installation instructions

1
1.1

Qualifications

These instructions are intended for weinor retailers and partners and assume relevant
knowledge. All installation work must be performed by a trained electrician.
1.2

Notes on remote control units

• Remote control units transmitting on the same frequency may disrupt reception.
• The range of the transmitted signal is restricted by law and structural measures.
1.3

Depiction

1.3.1

Warnings

The warnings differentiate between personal injury and damage to property. The signal word
"Danger" is used for personal injury, and "Caution" for property damage.
DANGER
IMPORTANT
1.3.2

Tips and recommendations

Highlights useful tips and information that enable fast and correct installation.
1.3.3

Illustrations

References to item numbers can be found in the text in parentheses, e.g. (1).
1.3.4

Instructions requiring action

Instructions requiring action are written in bold print. If the instruction requiring action consists of
several individual steps, these are numbered in the order in which they are to be carried out.
Example:
1. Getting started
1. Press the Program key.
2. Press the Learn key.
BiConnect BiRec On/ Off
Assembly and installation instructions/ Notice de montage et d'installation
We reserve the right to make technical changes/ Sous reserve de modifications techniques
Immediate danger to life and limb!
Immediate danger to the product and environment!
Version 1 2016-01-01
Item number/
Numéro d'article 119759-0000 Page 3/20