Table of Contents
Advertisement
REMOVING THE HEATING
ELEMENT
1. Unplug the power plug of the heating element (Fig. 1/6) from the socket or from
the temperature controller.
2. Allow the heating element (fig. 1/3) to cool completely; ensure that it has cooled
before touching the heating element.
WARNING: Chemicals can be harmful and can cause injuries if there is skin
contact.
• Wear personal protective equipment when handling hazardous chemicals.
Comply with the instructions specified on the appropriate safety data sheets.
3. Remove the heating element by detaching the suction cups from the surface.
4. Place the heating element on a non-flammable, moisture-resistant substrate.
MAINTENANCE INSTRUCTIONS
Regularly remove deposits on the heating element with a suitable brush so
n
there is no encrustation and damage on the heating element.
If the cable is damaged (Fig. 1/5) replace the entire heating element. The power
n
cable cannot be replaced separately.
DISPOSAL
When the device has reached the end of its service life, dispose of
the heating element and all accessories as specified by applicable
environmental regulations. Electrical waste should not be disposed
of together with household waste.
Advertisement
Table of Contents
