Safety Instructions - D-D The Aquarium Solution TITANIUM Instruction Manual

SAFETY INSTRUCTIONS

WARNING
The heating element is operated with electric power and generates high operating
temperatures that can cause burn injuries and material damage if there is contact
with the heating element.
• Prior to performing any work disconnect the heating element from the power
supply. To do this, unplug the power plug (Fig. 1/6) from the socket and allow the
heating element to cool before reaching into the aquarium, terrarium or basin.
• Allow the heating element to cool to ambient temperature and dry before you
touch it.
• Only grasp the heating element on the cap (Fig. 1/1).
• Do not leave the heating element unattended if children or persons who cannot
assess the hazards are in the vicinity.
• The heating element is not designed to be used by persons (including children)
with limited physical, sensory, or mental capacities, or lack of experience and/
or knowledge, unless such persons are supervised by a person responsible for
their safety, or have received instructions on how to operate the device from the
person responsible for their safety.
NOTE:
Use a temperature controller to prevent uncontrolled heating of the heating
element (e.g. the D-D Temperature Controller TC125).
PREPARING
Unpack the heater and ensure that the contents are complete and undamaged.
If you notice any transport damage contact the dealer from whom you purchased
the heating element straight away.