These operating instructions are part of this product. They contains important notes to the operation and handling. Please take this into consideration when you pass on the product to third parties. Neglect of the operating instructions and the safety instructions lead to expiring the warranty. Graupner constantly work on the advancement of all remote control systems;...
• your transmitter is the only one working on that frequency, • is switched on, • and has the throttle set to position “STOP”. • Use only high-quality batteries by Graupner or GM-Racing. Cheap or old batteries with a high inter- nal resistance may lead to poor •...
Note: when using a brushed DC motor, please ensure that the confi guration between the ESC and the motor must be in accordance with the selected application in the ESC ( one way-forward or two wayre- versible). See the detailed confi guration in the fi gure. If soldering would be applied to the ESC over 5 seconds, it could damage the ESC.
Page 5
5. Advance Timing - Timing 0° and motor type sensored = Zero Boost Modus, indicated by green LED fl ashing in neutral 6. Acceleration 7. Start Power 8. Start Current Limit Function 9. Current Limit Function 10. Reverse Function 11. Reverse Delay 12.
Sensorless Sensored Brushed Default 1 Motor Type Brushless Sensorless (1) / Brushless Sensored (2) / Brushed (3) Sensored 2 Battery Type LiPo (1) / LiFe (2) / NiMh (NiCd) (3) LiPo 3 Cut Off Voltage Auto (1) / 3,0 V ~ 6,5 V (0,1 V Step) Auto 4 Power Curve Soft (1) / Linear (2) / Hard (3)
7. FIRMWARE UPDATES: Firmware updates for the GM Genius ESC are transferred conjunction with a PC running Windows XP, Vista or 7. For this you also require the USB interface, Order No. 7168.6, the adapter lead, Order No. 7168.6A and a Y-cable Order No. 3936.11 which are available separately. The programs and fi...
described above. The Status display and the Progress bar show the progress of the fi rmware update. The update is com- pleted when the message “Complete…100%” or “Complete!!” appears. Switch off the ESC and connect it to the receiver again. 8.
Page 9
EG Decleration of Conformity: For the products GM-GENIUS RACE 80R Order No. 7156 GM-GENIUS RACE 120R Order No. 7158 PROGRAMMER Order No. 7152 for GM-GENIUS RACE 80R, 120R We confi rm that the electromagnetic compatibility directives (2004/108/CE) are met. Harmonized standards applied: EN 61000-6-1 EN 61000-6-3 Graupner GmbH &...
I 25064 Gussago (+39) 30 25 22 73 2 Garantie-Urkunde Warranty certifi cate / Certifi cate de garantie 7156 Genius Race II 80R 7158 Genius Race 120R Übergabedatum Date of purchase/delivery Date de remise Name des Käufers...
Page 12
Graupner GmbH & Co. KG Henriettenstraße 94 – 96 D-73230 Kirchheim/Teck Germany www.graupner.de Änderungen sowie Liefermöglichkeiten vorbehalten. Lieferung durch den Fachhandel. Bezugsquellen werden nachgewiesen. Für Druckfehler kann keine Haftung übernommen werden. Specifi cations and availability subject to change. Supplied through specialist model shops only. We will gladly inform you of your nearest supplier.
Need help?
Do you have a question about the 7156 Genius Race II 80R and is the answer not in the manual?
Questions and answers