Speakers Connection; Optional Connection; Connecting A Usb Device Or Memory Card; Connecting A Non-Usb Device - Philips MCM726/12 User Manual

FM Antenna
●
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
C

Speakers Connection

ont Speakers
nnect the speaker wires to the SPEAKERS t
rminals, right speaker to "R" and left speaker to
"L", coloured (marked) wire to "+" and black
(nmarked) wire to "-".
1
●
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of + / - speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.

Optional connection

The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.
By connecting a USB mass storage device
(including USB flash memory, USB flash players
or memory cards) to the Hi-Fi system, you can
enjoy the device's stored music through the
powerful speakers of Hi-Fi system.
●
Insert the USB device's USB plug into the
socket on the set.
OR
for the devices with USB cables:
1
Insert one plug of the USB cable (not supplied)
to the
2
Insert the other plug of the USB cable to the
USB output terminal of the USB device.
for the memory card:
2
1
Insert the memory card into a card reader (not
supplied).
2
Use a USB cable (not supplied) to connect the
card reader into the
Use a cinch cable to connect AUX/CDR IN to
the analogue audio out terminals of an external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder).
Note:
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX IN left terminal. Alternatively, you can use
a "single to double" cinch cable (the output sound
still remain mono).
Preparations
Connecting a USB device or memory
card
socket on the set.

Connecting a non-USB device

socket on the set.
9