Install The Battery - RCA Symphonix Series User Manual

7.
Place the hole on the bottom
of tube connector over the
post on the top of the earpiece
(shown here). Turn the tube
sideways on the top of the
earpiece and push straight
down to attach the tube to the
earpiece.
8.
Rotate the tube into the correct position for use with
the earpiece.

Install the battery

1.
Open the battery door on the
back of the earpiece.
2.
Find the battery bag in the
storage case. Remove the
battery from the bag.
3.
Peel the protective tab off the
back of the battery.
IMPORTANT: Don't remove
the battery's protective tab
until you're ready to use the
battery! A ZA312 battery can
last for years in storage if you
leave its protective tab in place (see expiration date to
be sure). Removing this tab activates the battery for
use, which means the battery will run out of power in
a matter of weeks (probably even sooner), whether
you use it or not.
4.
Place the battery into the
battery door as shown here.
Post
continues on next page...
4