STANDBY-ON
M I C RO S Y S T E M M C M 1 4 9
iR
CD/CD - R/CD - RW COMPATIBLE
SOURCE
VOL
TUNING
ALBUM/PRESET
VOL
DBB
Tuning to radio stations
1
Press SOURCE on the set repeatedly or press
TUN on the remote control repeatedly until
the desired waveband (FM or MW) is displayed.
2
Press down on TUNING 4 ¢ (à / á
on the remote control) and release the button.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
3
Repeat step 2 if necessary until you find the
desired station.
●
To tune to a weak station, press TUNING 4
¢ (à / á on the remote control) briefly
and repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
pg001-pg020_MCM149_61
1
Press ALBUM/PRESET +
preset number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press PROG. for more than 2 seconds to
activate programming.
➜
AUTO is displayed and available stations are
programmed in order of waveband reception
MODE
PROG
strength. The first preset automatically stored will
then be played.
Manual programming
1
Tune to your desired station (see Tuning to radio
stations).
2
Press PROG. to activate programming.
➜
PROG
3
Press ALBUM/PRESET +
number from 1 to 40 to this station.
4
Press PROG again to confirm the setting.
➜
PROG
frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press ALBUM/PRESET +
desired preset station is displayed.
13
Radio Reception
+ /-
+
+
+
-
-
-
- to select the
flashes in the display.
+
+
+ /-
+
-
-
- to allocate a
-
disappears, the preset number and the
+ /-
+
+
- until the
-
-
+
-
2007.7.24, 16:02
13