Table of Contents
Advertisement
Control instructions for the third generation filter wheel in EZCAP-QT:
First we have to make sure we have to have EZCAP software, filter wheel drive, camera drive. These
can be downloaded to the latest version on our official website.
Then, connect the filter wheel and camera with 4pin wires in sequence (except for the special trigger
cable except QHY9), connect the camera and computer with USB cable, and also need to connect a
12V power supply to power the camera. After the correct connection, the second generation filter
wheel will automatically rotate two turns and then rest.
Open EACAP and click Camera to select the corresponding camera.
Then click on the Color wheel under Camera Setup. For the first time, you need to set the number of
filter wheel holes in the Setup.
As shown below:
Hide quick links:
Advertisement
Table of Contents
