POWERLINK AUX EXPANDER The OneRemote Powerlink AUX Expander enables two different sound sources to share ONE set of Bang & Olufsen PowerLink AUX Expanders. Input Sources: • Any Bang & Olufsen radio or TV sound source. • Any level controlled analog audio source like a TV, a Sonos system, an Apple Airport, a Bluetooth receiver, a DAB receiver or similar.
AUX source is playing but the sound level has been too low for more than 10 seconds. After 90 seconds of flashing the speaker will power off, unless the sound level rises during this period and thereby reset the time-out period. www.oneremote.dk...
LOSSLESS POWERLINK AUDIO PASS The PowerLink audio signals pass without any modification; the output of the is the same as the input. DATALINK PASS When the PowerLink source is active, any DataLink signals herein are passed directly to the output. www.oneremote.dk...
The AUX input can connect to any controlled line like an output from a preamplifier or a headphone output from a TV. Use the NR switch on the OneRemote AUX Expander to match the source and thereby reduce noise. Use the position giving the best result.
TECHNICAL SPECIFICATIONS Dimensions 25 x 45 x 74 mm Included accessories Power 12VDC @ 400mA Euro CONNECTIONS Sockets: PowerLink in DIN 8-pin PowerLink AUX in 3.5 mm stereo jack DIN 8-pin PowerLink Power 12V DC 300mA www.oneremote.dk...
When only the TV is powered up, the TV sound is routed through the AUX Expander. If a Beo4 is modified with a OneRemote RMB4 converter, it can operate both the TV and the radio. A complete Bang & Olufsen system with a PowerLink Add music to any Bang &...