Controls On The System And Remote Control; Controls Buttons Available On The Remote Control Only - Philips MCM204/77 User Manual

Controls
(illustrations on page 3)
Controls on the system and
remote control
1
STANDBY ON (2)
– switches the system to standby/on.
2
DISPLAY/CLOCK
for CD ................. displays the current track
number and total remaining time
(or current album and track
numbers for MP3 disc) during
playback.
for clock .............. sets the clock function
3
INTERACTIVE SOUND controls:
DBB .................... (Dynamic Bass Boost) enhances
the bass.
DSC ..................... (Digital Sound Control) selects
sound characteristics: JAZZ/POP/
CLASSIC/ROCK.
4
USB port
– connects to external USB mass storage device.
5
SOURCE
– selects the respective sound source for CD/USB/
TUNER/TAPE/AUX.
– switches on the system.
6
Mode Selection
2; ........................... starts or interrupts CD playback.
9 ............................. stops CD playback or erases a
CD programme.
ALBUM/PRESET 4 3
for radio .............. selects a preset radio station.
for MP3 disc ..... selects an album.
TUNING 4 ¢
for Tuner ............. tunes to radio stations.
for CD ................. skips to the beginning of the
current/previous/subsequent
track.
................................. fast searches back and forward
within a track/CD.
for clock/timer adjusts the hours and minutes
for the clock/timer function
7
VOLUME (VOL -/+ )
– adjusts the volume level.
8
iR SENSOR
– infrared sensor for remote control.
10
9
Tape Deck Operation
RECORD● ... starts recording.
PLAY 2 ............ starts playback.
SEARCHà / á fast rewinds/winds the tape.
STOP•OPENÇ0
................................. stops the tape; opens the tape
compartment.
PAUSEÅ ....... interrupts recording or playback.
0
OPEN•CLOSE3
– opens/closes the CD door.
AUX jack (located on the back panel)
– connects an external source (3.5 mm socket)
HEADPHONE (located on the back panel)
– connects headphones
Controls available on the remote
control only
!
CLOCK
– sets the clock function.
@
AUX
– selects AUX sound source
#
PROG
for CD ................. programmes tracks and reviews
the programme.
for Tuner ............. programmes tuner stations
manually or automatically.
$
REPEAT
– repeats a track/disc/ all programmed tracks.
%
SHUFFLE
– plays CD/MP3 tracks in random order.
^
CD/USB/TUNER/TAPE
– selects the respective sound source.
&
TIMER
– sets the timer function.
*
SLEEP
– activates/deactivates or selects the sleeper time.
(
DISPLAY
for CD ................. displays the current track
number and total remaining time
(or current album and track
numbers for MP3 disc) during
playback.
)
MUTE
– interrupts and resumes sound reproduction