Controls; Controls On The System And Remote Control - Philips FW-C505 User Manual

Controls

(main system's illustration on page 3)
Controls on the system and
remote control
1
ECO POWER
– to switch the system on or to Eco Power
Standby mode.
2
STANDBY ON y
– to switch the system on or to Standby mode.
3
DISPLAY SCREEN
– to view the current status of the system.
4
DISC TRAY
5
DISC CHANGE
– to change disc(s).
6
DISC 1 / DISC 2 / DISC 3 (CD DIRECT)
– to select a disc tray for playback.
7
OPEN•CLOSE
– to open or close the disc tray.
8
INTERACTIVE VU METER
– to show the VU (volume unit) meter in music or
volume mode depending on the display mode
selected.
9
VOLUME
– to increase or decrease the volume.
0
Tape Deck Operation
AUTO REPLAY (AUTO RE.)
– to select continuous playback in either AUTO
PLAY or ONCE mode only.
DUBBING
– to dub a tape.
REC
– to start recording on tape deck 2.
!
SOUND NAVIGATION
– to select the desired sound feature : DSC, VAC,
or DBB.
@
JOG CONTROL
– to select the desired sound effect for the
selected sound feature.
DSC .................. DIGITAL, ROCK, POP, NEWAGE,
CLASSIC or ELECTRIC.
VAC .................. HALL, CONCERT, CINEMA,
DISCO, ARCADE or CYBER.
DBB .................. BEAT, PUNCH or BLAST.
#
INCREDIBLE SURROUND (IS)
– to activate or deactivate the surround sound
effect.
10
pg 001-030/C505/22-Eng
$
MAX SOUND (MAX ON/OFF)
– to activate or deactivate the optimal mix of
various sound features.
%
ç
– to open the tape deck door.
^
TAPE DECK 2
&
TAPE DECK 1
*
SOURCE – to select the following:
CD / (CD 1•2•3)
– to select disc tray 1, 2 or 3.
TUNER / (BAND)
– to select waveband : FM, MW or LW.
TAPE / (TAPE 1• 2)
– to select tape deck 1 or 2.
AUX / (CDR/DVD)
– to select a connected external source :
CDR/DVD or AUX (auxiliary) mode.
(
Mode Selection
PLAY PAUSE ÉÅ
for CD ................. to start or interrupt playback.
for TAPE .............. to start playback.
for PLUG & PLAY...(on the system only) to
SEARCH• TUNING à á
for CD ................. to search backward/forward.
for TUNER ......... to tune to a lower or higher radio
for TAPE .............. to rewind or fast forward.
for CLOCK ....... (on the system only) to set the
DEMO STOP/CLEAR Ç
for CD ................. to stop playback or to clear a
for TUNER ........ to stop programming.
................................. (on the system only) to delete the
for TAPE .............. to stop playback or recording.
................................. to reset tape counter number.
for DEMO ......... (on the system only) to activate/
for CLOCK ....... (on the system only) to exit clock
for PLUG & PLAY...(on the system only) to exit
10
initiate and start plug & play
mode.
frequency.
hour.
programme.
preset radio station.
deactivate the demonstration.
setting or cancel timer.
plug & play mode.
3139 115 21531
12/27/01, 11:11 AM