nest Hello How To Install page 4

The app will begin installation steps.
Tip: ​ I f you're having trouble scanning the code, make sure you have good lighting and that
you're not casting a shadow on the code.
You can also, tap ​ C ontinue Without Scanning ​ a nd type in the characters at the top of the QR
code.
4. Skip the app instructions
When you get to this step, tap ​ S kip​ .
Then follow the instructions in this article to install Hello with the Indoor
Power Adapter. You'll come back to the app instructions later.
5. Check if you need to use the wedge
You can use the included wedge i​
corner, or you simply want to change the viewing angle a bit.
Stick the wedge onto the wall plate with the adhesive strips.
Make sure you install the wedge the right way
● You can flip the wedge to angle the camera in the
opposite direction.
● The horizontal screw hole on the wall plate should be
on the bottom.
f you're installing Hello in a