1. Turn off power
Before you get started, go to your home's breaker or fuse box
and turn off the power to anything near the door where you're
installing Hello (existing doorbell, porch lights, power outlets,
etc.). This will protect you while you drill through the wall.
Important
● Try turning the porch lights on to confirm the power is
off. If you need to, you can also turn off the main power
switch at the breaker box.
● Keep in mind that you'll need to know where any in-wall plumbing and electric wiring
are.
● Check the building codes where you live to make sure your installation is safe.
2. Sign in to your account or create one
● If you're new to Nest: G o to the
Nest app and create a free account.
● If you already own a Nest product: S ign in to your account on the app, if you aren't
already.
Note: If you have more than one home in your account, make sure that you've first selected
the
N est home
where you want to install your camera. Tap Menu
home screen to change homes.
3. Scan the QR code
● If you're new to Nest: Tap A dd New
● If you already own a Nest product: Tap S ettings
app home screen. Then select A dd product.
Then scan the QR code on the back of Hello. You can also find it on the brown envelope that
came in the box.
Installation steps
G oogle Play
on the app home screen.
or
A pple App Store
in the top left of the
in the top right corner of the
to download the
Need help?
Do you have a question about the Hello and is the answer not in the manual?