Radio Reception; Tuning To Radio Stations; Programming Radio Station; Automatic Programming - Philips MCD177/98 User Manual

Radio Reception

Tuning to radio stations

1
Press SOURCE on the set (or FM on the
remote control ) repeatedly until FM is displayed.
2
Press down on TUNING à / á (or à / á
on the remote control) and release the button.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
3
Repeat step 2 if necessary until you find the
desired station.
●
To tune to a weak station, press TUNING à /
á (or à / á on the remote control) briefly
and repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory.

Automatic programming

Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be erased.
●
In tuner mode, press and hold PROG until
"AUTO" appears on the display panel.
➜
All previously stored radio stations will be
replaced.
32
D 7

Manual programming

1
Tune to your desired station (see Tuning to radio
stations).
2
Press PROG on the remote control to activate
programming.
➜
flashes in the display.
PROG
3
Press í/ ë to allocate a number from 1 to 20
to this station.
4
Press PROG on the remote control again to
confirm the setting.
➜
disappears. The preset number and the
PROG
frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

●
Press í/ ë until the desired preset station is
displayed.