Spectrum 99057 Assembly Instructions

Assembly Instructions Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
• If the worksurface needs to have a cutout made to receive the
charging pad, refer to the hole-cutting instructions first (included).
Then proceed with the installation instructions below.
• The unit requires a 7" diameter of clearance to work with Qi-
enabled phones placed in any orientation.
• The 3" dia cutout needs to be located on the worksurface at least
3.5" from any edge.
Installation
1. Partially unscrew (1) of the flat head screws under the unit.
Figure 1.
(1) 0191147
EM Wireless Charging Pad
(1) 0142246
Security tab
Flat head screw
Figure 1
EM Wireless Charging Pad
3" dia cutout
7" dia
interference-
free zone
2. Place the security tab over the flat head screw. Figure 2.
99057
Phillips
screwdriver
Security tab
0191158R2 Page 1 of 2
Figure 2