Troubleshooting
Problem
Left and right sound outputs are
reversed.
The remote control does not function.
Wireless connection with the subwoofer
fails
The timer is not working
The Clock/Timer setting is erased
Unable to select Progressive Scan.
Some files on the USB device are not
displayed.
"DEVICE NOT SUPPORTED" scrolls on the
display.
28
Solution
✔
Check the speaker connections and location.
✔
Point the remote control at the remote control
sensor of the unit.
✔
Reduce the distance to the player.
✔
Remove any possible obstacles.
✔
Replace the batteries with a new ones.
✔
Check that the battery is loaded correctly.
✔
Ensure that the subwoofer is powered on.
✔
The distance between the main set and
subwoofer may exceed the maximum range of
wireless communication. Move the subwoofer
closer to the main set.
✔
Obstacles may exist between the main set and
subwoofer. Remove the obstacles.
✔
Strong interference may exist. Ensure there is no
strong interference that may impair the
communication between the main set and
subwoofer.
✔
If the problem remains, see "Installation - Step 1:
Connecting speakers - Connecting the wireless
subwoofer" for manual pairing.
✔
Set the clock correctly.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔
Check that the output of the video signal is
switched to 'Pr/Cr Pb/Cb Y'.
✔
Check if the number of folders exceeds 99 or
the number of titles exceeds 999.
✔
Remove the USB mass storage device or select
another source.