Radio Reception; Tuning To Radio Stations; Programming Radio Stations; Automatic Programming - Philips MCD289/79 User Manual

Radio Reception

Tuning to radio stations

1
Press SOURCE on the set repeatedly or
TUNER on the remote to select FM tuner
source.
2
Press and hold TUNING 22/33 (2/3 on
the remote control) and release the button.
➜
The radio automatically tunes to a station
with sufficient reception.
3
Repeat step 2 if necessary until you find the
desired station.
● To tune to a weak station, press TUNING 22/
33 (2/3 on the remote control) briefly and
repeatedly until you have found optimal
reception.

Programming radio stations

You can store up to a total of 20 FM radio
stations in the memory.

Automatic programming

Press PROGRAM for more than three seconds
to activate programming.
➜
All available stations are programmed.
➜ AUTO is displayed and available stations are
programmed in order of waveband.

Manual programming

1
Tune to your desired station (refer to "Tuning to
radio stations").
2
Press PROGRAM to activate programming.
➜
PROG flashes on the display.
3
Press PRESETí/ë to allocate a number
from 1 to 20 to this station.
4
Press PROGRAM again to confirm the setting.
➜
PROG disappears.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

●
Press PRESETí/ë until the desired preset
station is displayed.
22