Connections; Step 1: Placing Speakers - Philips MCD710/98 User Manual

Connections

Speaker
(right)
AC power
IMPORTANT!
– The type plate is located at the
bottom of the system.
– Before connecting the AC power cord
to the wall outlet, ensure that all
other connections have been made.
– Never make or change any
connections with the power switched on.
– The voltage selector located at the
bottom of this system is preset at
220V-240V from the factory. For
countries that operate at 110V-127V,
please adjust to 110V-127V before you
switch on the system.
8
FM antenna

Step 1: Placing speakers

Front
speaker
( left )
Place the front left and right speakers at equal
distances from the TV set and at an angle of
approximately 45 degrees from the listening
position.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to your TV set.
– Allow adequate ventilation around the DVD
System.
AC power
Speaker
(left)
Front
speaker
( right )
VIEWING AREA