3
Close the battery compartment.
Set clock
1
In standby mode, press and hold CLOCK
on the main unit to activate the clock
setting mode.
»
[SET CLOCK] (set clock) is displayed
briefly. Then the hour digits are
displayed and begin to blink.
Note
•
In Eco Power Standby mode, press
show clock first, then press and hold CLOCK
to proceed clock setting.
2
Press
on the main unit repeatedly to
select 12 hour or 24 hour format.
3
Turn VOLUME+/- to set the hour.
4
Press CLOCK to confirm.
»
The minute digits are displayed and
begin to blink.
5
Turn VOLUME+/- to set the minute.
6
Press CLOCK to confirm.
Turn on
1
Press STANDBY-ON on the main unit.
»
The apparatus switches to the last
selected source.
10
EN
Switch to standby
1
To switch the apparatus to Eco Power
Standby mode:
1
CLOCK to
Press
to switch the apparatus to
standby mode.
»
The backlight on the display panel is
reduced.
»
The clock (if set) appears on the
display panel.
In standby mode, press
more than 2 seconds.
»
The backlight on the display panel
turns off.
Note
•
If no button is pressed over 15 minutes in
Standby mode, the unit goes to Eco Power
Standby mode automatically and the backlight
on the display turns off.
and hold for