Activation; Unpacking; Activating The Battery; Connecting The Antennas - Sonoro Elements Instruction Manual

6. A
CTIVATION
U
NPACKING
Please unpack your
sily accessible location. When selecting its location, pay special attention to the
safety information on page 4 and 5.
A
CTIVATING THE BATTERY
Your has an integrated battery
elements
power failure. To guarantee that the lifespan of this battery is as long as possible,
the battery has been separated from the electrical circuit with red plastic foil at
the factory. Please pull off this foil before the first use of your
C
ONNECTING THE ANTENNAS
Your
elements
installed antenna can suffice for the reception of FM stations with good reception
conditions. If you would like to use the installed antenna, please set the antenna
⑨
selection switch
If you would like to improve the reception, either connect the provided cable an-
tenna to the „
house antenna through the same connection
tenna, please set the antenna selection switch
> If you have a cable connection, you can connect the antenna connection
with a customary coaxial cable to your antenna outlet and receive radio through cable in this way. This
coaxial cable is not included in the scope of delivery.
If you would like to receive stations from the AM frequency range, you have
to connect the provided AM antenna. To do this, please plug the 3.5 mm jack
plug of the antenna into the „
Please make sure that you don't confuse the connections
each other.
> The FM frequency band corresponds to the FM range and lies between 87.5 MHz and 108.0 MHz
in the VHF band II. The AM frequency band corresponds to the medium frequency range and lies
between 522 kHz and 1620 kHz.
with the provided gloves and place it in an ea-
elements
can receive stations in the FM and AM frequency range. The
to „INT".
connection
⑭
to store the time of day in case of a
⑧
or connect your
⑧
. If you are using an external an-
⑨
to „EXT".
⑩
connection
.
elements
with your
elements
⑧
of your
elements
of your
elements
⑩ ⑪ ⑫
, and with
.
9