Set Up Wireless Connection Manually; Switch To Standby Mode; Find The Correct Viewing Channel; Select The Correct Tv System - Philips MCD388/55 User Manual

Set up wireless connection manually

1
In standby mode, press and hold
the main unit for 3 seconds.
» [PAIRING] (pairing) fl ashes.
2
Press and hold PAIR on the subwoofer for
3 seconds.
The blue and green indicators on the
»
subwoofer fl ash alternately.
If wireless connection succeeds,
»
OK] (pair OK) is displayed and the
blue indicators on the subwoofer lights
up.
3
Turn on the main unit again.
Note
•
If the wireless connection fails again, check whether
there is any confl ict or strong interference (for example,
interference from other electronic devices) around
your location. After removal of the confl ict or strong
interference, repeat the above procedures.

Switch to standby mode

1
Press again.
The clock (if set) appears on the
»
display panel.
Find the correct viewing
channel
1
Press to turn on the unit.
2
Press DISC to switch to disc mode.
3
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
• Go to the lowest channel on your TV,
then press the Channel Down button
until you see the Philips screen.
• Press the source button repeatedly on
the remote control of your TV.
18 EN
on
•
The video-in channel is between the lowest and highest
channels and may be called FRONT, A/V IN, VIDEO,
HDMI etc. See the TV user manual on how to select
the correct input on the TV.

Select the correct TV system

[PAIR
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
Press SYSTEM MENU .
2
Select [Preference Page] .
3
Select [TV Type] and then press
4
Select a setting and then press OK /
•
•
•
5
To exit the menu, press SYSTEM MENU .
•
When the HDMI cable is connected, the
option is unavailable.
Change system menu
language
1
Press SYSTEM MENU .
2
Select [General Setup Page] .
3
Select [OSD Lang] and then press
4
Select a setting and then press OK /
5
To exit the menu, press SYSTEM MENU .
Tip
[PAL] - For TV with PAL color system.
[Auto] - For TV that is compatible
with both PAL and NTSC.
[NTSC] - For TV with NTSC color
system.
Note
.
.
[TV Type]
.
.