Table of Contents
Advertisement
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.
Problem
No power.
No picture.
Distorted or poor picture.
Completely distorted picture or black/
white picture.
Troubleshooting
Solution
✔
Check if the AC power cord is properly
connected.
✔
Press STANDBY-ON B on the top of the
DVD micro system or B on the remote to turn
on the power.
✔
Check if the TV is switched on.
✔
Check the video connection.
✔
Press SOURCE on the top of the DVD player
repeatedly to select "DVD" or press DISC on
the remote.
✔
Set your TV to the correct Video In channel. This
channel is usually near channel 00. Or, you may
have a button on the TV remote control that
selects Auxiliary or A/V IN channel. See your TV
owner's manual for details. Or, change channels
at the TV until you see DVD screen on the TV.
✔
If the progressive scan feature is activated but
the connected TV does not support progressive
signals or the cables are not connected
accordingly, see "Getting star ted-Setting up
Progressive Scan feature" for proper progressive
scan setup or deactivate the progressive scan
feature as below:
1) Turn off your TV progressive scan mode or
turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit
the system menu and then DISC 1 (or DISC 2)
and "1" to exit progressive scan.
✔
Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
✔
Clean the disc.
✔
TV has a colour system standard. If the disc's or
DVD system's colour system is different than
your TV's colour system, the picture may be
distorted or colourless.
39
Advertisement
Table of Contents
