Table of Contents
Advertisement
The micro DVD player does not start
playback.
The DVD micro system does not
respond when the buttons are pressed.
Cannot activate some features, such as
Subtitles, or multi-language Audio.
The remote control does not function.
The display is dark.
Low hum or buzz sound.
Low bass response.
Troubleshooting
✔
Insert a readable disc with the playback side
facing down.
✔
Check the disc type, colour system and regional
code. Check for any scratches or smudges on
the disc.
✔
Press SETUP to turn off the setup menu
screen.
✔
Cancel the parental control rating function or
change the rating level.
✔
Moisture has condensed inside the system.
Remove the disc and leave the system turned
on for about an hour.
✔
Disconnect the power plug from the outlet and
insert again.
✔
Multi-language sound or subtitle is not
recorded on the DVD.
✔
Changing the language for the sound or subtitle
is prohibited on the DVD.
✔
The features may not be available on the disc.
✔
Point the remote control at the remote sensor
of the unit.
✔
Reduce the distance to the player.
✔
Remove any possible obstacles.
✔
Replace the battery with new one.
✔
Check that the battery is loaded correctly.
✔
Press DIM again.
✔
Place the DVD micro system as far away as
possible from electrical devices that may be
causing interference.
✔
Check all speakers for correct polarity.
23
Advertisement
Table of Contents
