Advertisement
TECHNICAL DATA
Rated voltage
Drilling capacity in steel
Drilling capacity in wood
Drilling capacity in brick and tile
Wood screws
No-load speed
1st gear
2nd gear
Impact rate
1st gear
2nd gear
Torque with battery (1.5 Ah / 2.0 Ah) *
Torque with battery (3.0 Ah) *
Torque with battery (4.0 Ah) *
Weight - not including battery pack
Measured values determined according to EN 62841.
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841.:
Impact drilling into concrete
Uncertainty K
Drilling into metal
Uncertainty K
Screwing
Uncertainty K
* test to AEG standard N 877318
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.
BATTERY AND CHARGER
Compatible battery pack
(not included)
L1815R
L1820R
L1825R
L1830R-X5
L1840R
L1850R
L1860R
L1860R-X5
L1890R
Use AEG 18V battery and charger only
16
CORDLESS PERCUSSION DRILL/DRIVER
specifications provided with this power tool. Failure to follow all instructions
Compatible charger
listed below may result in electric shock, fire and/or serious injury. Save all
(not included)
warnings and instructions for future reference.
AL18G
Hold the power tool by insulated gripping surfaces, when performing an
AL1218G
operation where the cutting accessory may contact hidden wiring. Cutting
BL1218
accessory contacting a "live" wire may make exposed metal parts of the power
BLK1218
tool "live" and could give the operator an electric shock.
BL18DP-X5
BL18DP2-X5
Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
16
WARNING! Read all safety warnings, instructions, illustrations and
DRILL SAFETY WARNINGS
SCREWDRIVER SAFETY WARNINGS
BSB18C2
18 V
13 mm
40 mm
13 mm
6 mm
0 - 450 min
-1
0 - 1800 min
-1
0 - 5850 min
-1
0 - 23400 min
-1
50 Nm
60 Nm
70 Nm
1.24 kg
L
= 87 dB(A)
p
3 dB(A)
L
= 98 dB(A)
W
3 dB(A)
a
= 15.6 m/s
2
h,ID
1.5 m/s
2
a
= < 2.5 m/s
2
h,D
1.5 m/s
2
a
= < 2.5 m/s
2
h
1.5 m/s
2
Advertisement
