Program Tracks; Display Time; Adjust Volume Level; Mute Sound - Philips DCM292/96 User Manual

Program tracks

Note
You can program tracks only when the play
stops.
You can program a maximum of 40 tracks.
1
Press PROG/CLOCK SET to activate the
program mode.
» PROG] (program) is displayed.
[
2
For MP3/WMA tracks, press / to select
an album.
3
Press / to select a track, then press
PROG/CLOCK SET
4
Repeat steps 2 to 3 to program more
tracks.
5
Press to play the programmed tracks.
»
During play, [ PROG] (program) is
displayed.
To erase the program, in the stop
position, press .

Display time

1
Press DISPLAY to display time.
Tip
In Eco Standby mode, time is displayed for
90 seconds.

Adjust volume level

1
During play, press VOL +/- to increase/
decrease the volume level.

Mute sound

1
During play, press
sound.
to mute/unmute

Select a preset sound effect

1
During play, press DSC repeatedly to
select:
[ POP] (pop)
[ JAZZ] (jazz)
[ ROCK] (rock)
[ CLASSIC] (classic)
[ FLAT

Enhance bass

1
During play, press DBB to turn on or off
dynamic bass enhancement.
»
If DBB is activated, [DBB] is displayed.
EN 15