Get Started; Turn On; Set The Clock; Find The Correct Viewing Channel - Philips MCD135/78 User Manual

5 Get started

Turn on

1
Press .
»
The unit switches to the last selected
source.
Switch to standby mode
If no source is played within 15 minutes, the
product switches to standby mode.
If no operation is performed within 15
minutes in standby mode, the product
switches to Eco-power standby mode.
To manually switch the product to standby
mode, press .

Set the clock

The unit uses the 24-hour time format.
1
In standby mode, press and hold
DISPLAY/CLOCK for 2 seconds.
»
The hour digits blinks.
2
Press / to set the hour.
3
Press DISPLAY/CLOCK.
»
The minute digits blinks.
4
Press / to set the minute.
5
Press DISPLAY/CLOCK.
Find the correct viewing
channel
1
Press to turn on the unit.
2
Press DISC to switch to disc mode.
3
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
• Go to the lowest channel on your
TV, then press the Channel Down
button until you see the blue screen.
• Press the source button repeatedly
on the remote control of your TV.
Tip
•
The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO etc. See the TV user
manual on how to select the correct input on
the TV.

Select the correct TV system

This product is compatible with both NTSC
and PAL. If the picture is abnormally displayed
with the default setting, select a TV system that
matches your TV.
See "Setup" > "System setup" > [TV SYSTEM]
for details.
Select a language for on-
screen-display messages
English, Portuguese and Spanish are optional for
this setting. See "Setup" > "Language setup" >
[OSD LANGUAGE] for details.
EN 13