GET STARTED Step 1: Insert the included 5-volt AC power adapter into the wall outlet then into the projection alarm. Step 2: Insert 2 new “AAA” batteries (not included) into the projection alarm. Observe the correct polarity. If the indoor temperature is not displayed after 60 seconds, unplug the AC adapter and remove batteries from the projection alarm, press a button 20 times.
ACTIVATE / DEACTIVATE TIME ALARM • Press the ALARM button once to view alarm time. • Press the ALARM button again to activate the alarm. Bell icon appears. • Press the ALARM button again to deactivate the alarm. Alarm The bell icon disappears. Bell Icon SNOOZE (Silences alarm temporarily) •...
PROJECTION (On/Off, rotate, projection mode) Battery Power: Press and release the SNOOZE/LIGHT button to show the projection for 10 seconds. Note: Using Battery power, the projection and backlight will come on for 10 seconds when SNOOZE/LIGHT is pressed. Projection will not display constantly when operating on battery power.
POSITION PROJECTION ALARM • The projection alarm has a wide base to sit on a desk or table. • Choose a location 6 feet or more from electronics such as cordless phones, wireless gaming systems, televisions, microwaves, routers, baby monitors, etc., which can prevent signal reception.
WARRANTY AND SUPPORT La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. View full warranty details online at: www.lacrossetechnology.com/warranty_info.pdf For warranty work, technical support or other information contact out friendly support...