Connect A Usb Storage Device; Connect Power - Philips MCD135/55 User Manual

1
Connect the component video cables to:
• the Y Pb/Cb Pr/Cr sockets on this
product.
• the component input sockets on the
TV.
2
Connect the audio cables to:
• the L and R sockets on this product.
• the audio input sockets grouped with
the component input socket that is
mentioned in step 1.

Connect a USB storage device

Note
•
For the best data transmission, use the
supplied USB cable only.
1
Connect the supplied USB cable to:
• the jack on this product.
• the plug of your USB storage device.

Connect power

Note
• Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
Risk of product damage! Make sure that the
power supply voltage corresponds to the
voltage printed on the back of the main unit.
•
Before you connect the AC power cord,
make sure that you have complete all other
connections.
•
Protect the power cord from being walked on
or pinched, particularly at plugs, convenience
receptacles, and the points where they exit
from the apparatus.
• Unplug this apparatus during lightning storms
or when unused for long periods of time.
12 EN
A round-to-flat power plug adaptor is
supplied. If the wall power sockets are for flat-
pin plugs, connect the adaptor tightly to the
power plug first.
1
Connect the AC power cord to
• the AC MAINS socket on this
product.
• the power supply.