Philips MCD135/51 User Manual page 22

A distorted picture may appear during
progressive scan setup.
The aspect ratio is fixed on the loaded
DVD disc.
The aspect ratio may not be changed for
some TV systems.
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected
correctly.
Before you press any function button,
first select the correct source with the
remote control instead of the main unit.
Reduce the distance between the remote
control and the unit.
Insert the battery with its polarities (+/–
signs) aligned as indicated.
Replace the battery.
Aim the remote control directly at the
sensor on the front of the unit.
Insert a readable disc with the label side
facing you.
Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
Press
setup menu.
Disable the password for parental control
or change the rating level.
Moisture has condensed inside the
system. Remove the disc and leave the
system turned on for about an hour.
Disconnect and reconnect the AC power
plug, and then turn on the system again.
As a power-saving feature, the system
turns off automatically 15 minutes after
disc play reaches the end and no control
is operated.
to exit the system
Ensure that the DivX video file is
complete.
Ensure that the file extension is correct.
Due to Digital Rights issue, the DRM-
protected video files cannot be played
through an analog video connection
(e.g. composite, component and scart).
Transfer the video content onto the Disc
Media and play these files.
Increase the distance between the
apparatus and your TV or VCR.
Fully extend the FM antenna.
Connect an outdoor FM antenna instead.
The disc is not recorded with sound or
subtitles in multiple languages.
The audio or subtitle language setting is
prohibited on the disc.
The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
The formats of these files are not
supported.
• The USB device is incompatible with the
unit. Try another one.
Set the clock correctly.
Switch on the timer.
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
23