Philips MCD135/51 User Manual page 12

Press to turn on the unit.
Press to switch to disc mode.
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
• Go to the lowest channel on your
TV, then press the Channel Down
button until you see the blue screen.
• Press the source button repeatedly
on the remote control of your TV.
• The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO etc. See the TV user
manual on how to select the correct input on
the TV.
This product is compatible with both NTSC
and PAL. If the picture is abnormally displayed
with the default setting, select a TV system that
matches your TV.
See "Setup" > "System setup" >
for details.
English, Portuguese and Spanish are optional for
this setting. See "Setup" > "Language setup" >
for details.
• Risk of damage to the unit! During play, never
move the unit.
•
Never put any objects other than discs into
the disc compartment.
•
Never look at the laser beam inside the unit.
•
Never play discs with accessories such as disc
stabilizer rings or disc treatment sheets.
When
operation, it indicates that this operation is
unavailable for the current media or at the
current time.
The listed operations are applicable for all
supported media.
Stop play
Pause or resume play
Skip to the previous/next
title, chapter, track, or file
Press to select the disc source.
Press to open the disc compartment.
Place a disc onto the tray with the printed
side upward, and then press .
Play starts automatically.
• To start play manually, press
• To play a DVD that you set a rating
level, enter the 4-digit parental
control password first (Refer
to "Setup" > "System setup" >
is displayed after an
Press .
Press .
Press / .
.
and ).
13