Advertisement
D. Cleaning & Maintenance
(1) Make sure that the device is switched off and chill-down before cleaning
or maintenance.
(2) Wipe the surface of the device by using a soft clean cloth when the
surface is dirty.
(3) When cleaning, do not use petrol, tianna water, attenuant and
anything which is easy to damage the outer surface of the material.
(4) During the usage, if the filter grille is dirty, it may cause overheat
inside please bring out it and cleaning. The filter grille can continue to
used after there is no water on it.
(5) When storage, the heater should be firstly cold, dried, and packaged in dry
and ventilated place.
12
Advertisement
