Safety; Important Safety Instructions - Thermador PALPKITHW5 Installation Instructions Manual

Safety

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS
Please read carefully
Save the original gas parts for possible conversion back in
the future.
Important: Only a qualified service technician or installer
should make this conversion.
Installer: Please leave these instructions with this unit for
the owner.
Owner: Please retain these instructions for future
reference.
WARNING
If the information in this manual is
not followed exactly, a fire or
explosion may result causing
property damage, personal injury or
death.
-- DO NOT store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
-- WHAT TO DO IF YOU SMELL GAS
• DO NOT try to light any appliance.
• DO NOT touch any electrical switch.
• DO NOT use any phone in your
building.
• Immediately call your gas supplier
from a neighbor's phone. Follow the
gas supplier's instructions.
• If you cannot reach your gas supplier,
call the fire department.
-- Installation and service must be
performed by a qualified installer, service
agency or the gas supplier.
Page. 4
This kit is for converting Thermador appliances for
operation with propane (LP) gas. This kit contains orifices
for proper LP conversion for oven bake, broiler, and
®
STAR burners.
This kit is used to convert select models of Pro Rangetop,
Pro Harmony, and Pro Grand ranges to propane (LP) gas
usage. This kit cannot be used to convert older models of
rangetops or ranges. This kit cannot be used to convert
any other brand of appliance.
WARNING
This conversion kit shall be installed by a
qualified service agency in accordance with the
manufacturer's instructions and all applicable
codes and requirements of the authority having
jurisdiction. If the information in these
instructions is not followed exactly, a fire,
explosion or production of carbon monoxide
may result causing property damage, personal
injury or loss of life. The qualified service
agency is responsible for the proper installation
of this kit. The installation is not proper and
complete until the operation of the converted
appliance is checked as specified in the
manufacturer's instructions supplied with the
kit.
For Massachusetts installations
1. Installation must be performed by a qualified or
licensed contractor, plumber, or gas fitter qualified or
licensed by the state, province or region.
2. Shut-off valve must be a "T" handle gas cock.
3. Flexible gas connector must not be longer than 36
inches.