Nortec LINKS 2 NHTC Installation And Operation Manual page 10

Variable Name
nvoNetSensor_x
nvoDisable_x
nvoSecurity_x
nvoService_x
nvoStatus_x
nvoConnection_x
nviDisable_x
nviNetSensor _x
6 | Installation
Table 4: Variable Definitions - CONTINUED
R=Read
W=Write
Reads configuration status for
network-enabled sensing or
R
0=%RH or %demand input is not
Binary Value
1=%RH or %demand input is from
Reads remote disable status.
R
0=humidifier enabled,
Binary Value
1=humidifier disabled by network
Indicates security loop status.
R
Binary
Reads service requirement status.
R
0=no service required,
Binary Value
R
Reads humidifier status.
0=standby, 1=humidifying.
Binary Value
Indicates that the NORTEC Links
R
module is communicating with the
Binary Value
Writes remote disable status.
W
0=humidifier enabled,
1=humidifier disabled from
Binary Value
Writes configuration status for
network-enabled sensing or
W
0=%RH or %demand input is not
Binary Value
1=%RH or %demand input is from
Table 5: Humidifier Variable Addresses – Unit #1
Description
control.
from the network
the network
0=Sec. loop open,
1=Sec. loop closed
1=service required
Humidifier
network
control.
from the network
the network
LonWorks SNVT
SNVT_switch
SNVT_switch
SNVT_switch
SNVT_switch
SNVT_switch
SNVT_switch
SNVT_switch
SNVT_switch