L3 comminications Stormscope II Series Pilot's Manual page 37

Weather mapping system
Hide thumbs Also See for Stormscope II Series:
Table of Contents

Advertisement

Chapter 3 – Operation
Error Message
Error 18
Processor Fault
Error 19
Processor Fault
Error 20
Configuration
Changed
Error 21
Processor Fault
Error 22
Invalid Synchro
Signals
Error 23
Invalid Synchro
Ref
Error 24
Mic Key Stuck
Error 25
SW Ver Error
Errors 26 thru 34
Processor Fault
Errors 35 and 36
Processor Fault
*F=Fatal, NF=Non-Fatal, R=Recoverable, NR=Non-Recoverable (Description follows table.)
®
Stormscope
WX-950 Pilot's Guide
Table 3-1. Error Messages (Continued)
Fault Source
Invalid test strike
Main Processor
data overload
Antenna jumper
configuration
changed since
last time power
was applied to
the system
Main processor
Invalid XYZ
input (gyro may
still be spinning
up)
No 400 Hz
reference
Mic key (inhibit
line) stuck. The
microphone key
has been
depressed for
more than 1
minute
Main processor
Main processor
DSP or main
processor
Type*
Recommended Action
NF/R Press any button to continue
without weather mapping
functions. See your dealer for
service if this error occurs
frequently.
NF/R Press any button to continue
without weather mapping
functions. See your dealer for
service if this error occurs
frequently.
NF/R Press the "TOP" or
"BOTTOM" button to
respond to the prompt "Select
Antenna Location." If jumper
does not agree with user se-
lection, "Configuration Fault"
is displayed and continued
operation is not possible.
F
Turn off the unit and see your
dealer for service.
NF/R Press any button to continue
without heading stabilization.
See your dealer for service.
NF/R Press any button to continue
without heading stabilization.
See your dealer for service.
NF/R Check your microphone key to
correct the problem. If not
correctable, press any button to
continue without weather
mapping functions and see
your dealer for service.
F
Turn off the unit and see your
dealer for service.
F
Turn off the unit and see your
dealer for service.
NF/R Press any button to continue
without weather mapping
functions. See your dealer for
service.
Error Messages
1-15
3-15

Advertisement

Table of Contents
loading

Related Products for L3 comminications Stormscope II Series

This manual is also suitable for:

Stormscope ii wx-950

Table of Contents