Smart Bridge HC8301 Quick Manual

Notice:

1.

Setting up your IoT camera.

2. Paring Sensors To Your Iot Camera
3.

Download full user manual:

Before Using

1 Requirement for first time setting：Camera and smart phone/tablet are under same Wi-Fi
router
2 Application for smart phone and tablet："Cam Can"

Reset button:

SETUP

First Time Setup:

Wireless Setup

1. Search for "Cam Can" on Google Play or Apple Store, or scan the QR code on the next
page.
2.
Plug in the adaptor to the wall and camera.
3.
Wait for 15 seconds; camera will turn to AP mode when the LED blinks (green and
orange).
Go to "Wi-Fi settings" on your smart phone/ tablet (like No.1). Find "Cam Can-
4.
XX:XX:XX:XX:XX:XX" and connect to it.(for iOS it is in***) The default password is
"12345678".
5. Add camera to APP: Open "Cam can" and enter "Configuration–Wireless"(like No.2),
select the Wi-Fi router you want to use and key-in your Wi-Fi router's password.
1.5.1 When the APP shows "Do you want to connect to Wi-Fi router"(like No.2)，If
you want connect to internet, please select "Yes" and continue to 1.5.2. If not, please
select "No". If you select no; the camera will connect your smart phone/tablet directly.
You cannot use the system out of camera's wireless area.
HC8301/HC8301A
Quick Guide
1.5.2 (like No.3) Select the Wi-Fi router you want to use and key-in your password.
Wait 30-40 seconds, when the LED turns green; the setup was successful.
(No.1)

App Download:

Android：

Setup Video:

(No.2) (No.3)
Apple:
UM001-001 RF 2015/09/30