Connecting Smart Device Application
If you install "Navien Mate" App and connect to your device via Wi-Fi, you can control
your Navien Mate.
How to download "Navien Mate" App.
Search and down load for"Navien Mate" in Google play store or Apple App Store.
[Android] Run Google Play Store
[iOS] Launch App Store
Supported OS
iOS 9.0+, Android 4.4+
(Some features may work differently when operating on other smart phones.)
Connect the smart device after installing the application
How to connect Wi-Fi after installing the application
Make sure you have downloaded "Navien Mate" App.
Connecting Wi-Fi
When the boiler is on, press
same time, the smart device is ready to connect the
display blinks.
Connecting to APP
Launch the Navien Mate app on your phone. Select [Connect Wi-Fi] to go to each connection screen.
(Please refer to the following page for more information on How to Connect Application and Bed
Warming Mattress Pad using Wi-Fi
Terminating Smart Device Connection
If you want to exist from this app, press the
for 2 seconds, the lamp disappears and disconnects with the smart device.
Please check before connecting to Wi-Fi!
Be sure to release below Wi-Fi Setting. (May different according to device brands)
Prevent bad networks
Disconnect weak signaling Wi-Fi
Disconnect when Internet is not
available
18
Search for 'Navien Mate'
Select Search
Enter 'Navien Mate'
and hold the
Disconnect abnormal AP
Automatically switch networks
Install
Select [Download]
button for two seconds at the
lamp on the screen
button and
button on the boiler control panel
Select
Run
Download
Check Internet service
Switch to smart network