Denver DSB-4010MK2 User Manual

Operating Introduction

a. Place the Soundbar on a flat and solid surface. Alternatively, you can wall mount the Soundbar with the
screws provided. You can hear audio through the Soundbar using ONE of the following connections.
1. Connect to your television using one of the connectors.
⚫
HDMI-ARC connector on the TV (using an HDMI cable)
⚫
Optical output connector on the TV (using an optical cable)
⚫
Headphone jack (using the supplied audio cable with 3.5mm plug)
2. Connect to a Bluetooth enabled device.
3. Connect to a USB drive (stick) loaded with music files
b. Illustration of the Soundbar connectors for different connections
EN
OPTICAL IN
HDMI-ARC
LINE IN
DC 19V IN
c. The control panel on the Soundbar
Sound Bar User Manual
EN
Hold down /MODE for Power
On/Standby.
Press the /MODE button to toggle the
sources: Bluetooth -> USB Drive ->
Line In -> HDMI-ARC -> Optical In
Press/Hold down II / MUTE for
Pause/Play. (USB Drive)
Press/Hold down II / MUTE for Mute /
No Mute. (Line In)
Hold down VOL+ /I for Volume up.
Press VOL+ /I for Next USB Drive
Song.
Hold down VOL- / I for Volume
down.
Press VOL- / I for Previous USB
Drive Song.
EN
OPTICAL IN
HDMI-ARC
LINE IN
DC 19V IN
EN
Hold down
On/Standby.
Press the
sources: Bluetooth -> USB Drive ->
Line In -> HDMI-ARC -> Optical In
Press/Hold down II / MUTE for
Pause/Play. (USB Drive)
Press/Hold down II / MUTE for Mute /
No Mute. (Line In)
Hold down VOL+ /I for Volume up.
Press VOL+ /I for Next USB Drive
Song.
Hold down VOL- / I for Volume
down.
Press VOL- / I for Previous USB
Drive Song.
/MODE for Power
/MODE button to toggle the