Philips Beauty SalonStraight Ion HP4648 Manual page 10

ENGLISH
10
4 When the pilot light turns green the default temperature of
100cC has been reached.When the appliance has reached this
temperature, you can adjust the temperature to your preference
(fig. 2).
- Press the + button to increase the temperature or press the -
button to decrease the temperature.The display tells you which
temperature you have selected.The pilot light turns red to indicate
that the appliance is adjusting the temperature.
- The pilot light turns green when the selected temperature has been
reached.
5 Comb or brush your hair so that it is disentangled and smooth
(fig. 3).
Use a comb to divide the hair into sections. Do not put too much hair
in one section.
Tip: it is better to section off the crown area and to straighten the hair
B
underneath first.Then straighten the top area.
6 Take a section that is not wider than 5 cm. Place it between the
straightening plates and press the handles of the appliance firmly
together.
7 Slide the straightener down the length of the hair in 5 seconds,
from root to hair end, without stopping to prevent overheating
(fig. 4).
8 Repeat this process after 20 seconds until you have achieved the
desired look.
9 Allow your hair to cool down. Do not comb or brush it before it
has cooled down, as this would ruin the hairstyle you have just
created (fig. 5).
Reducing frizz and static electricity
The ioniser inside the hairstyler generates streams of ions that surround
and condition your hair. Ions reduce frizz and static electricity and leave
your hair looking soft, smooth and shiny.
The ioniser starts working as soon as the appliance is switched on.