Summary of Contents for Presto Power Stak PPS2200-62NFO-27
Page 1
Power Stak PPS2200-62NFO-27 This manual covers PowerStak units with frame numbers starting with GC stamped into the mast and shipped March 2014 and after. Installation, Operation and Service Manual Model Number ______________________________ Serial # ____________________________________ Date Placed in Service ________________________ IMPORTANT: READ CAREFULLY BEFORE INSTALLING OR OPERATING LIFT February 2019...
There are no implied warranties of any kind, more specifically; there are no warranties of merchant- ability or fitness for any particular purpose. Presto Lifts’ sole warranty shall be as set forth in this limited warranty. Presto Lifts will elect to repair or replace a defective component without charge, if any components should become defective within the limited warranty period.
This manual attempts to provide all of the information necessary for the safe and proper installation, operation and maintenance of Presto Lifts Inc. battery operated, Power Stak. It is important that all personnel involved with the installation, maintenance or operator of the stacker read this manual.
Responsibility of Owners and Users Inspection and Maintenance The device shall be inspected and maintained in proper working order in accordance with Presto’s owner’s manual. Removal from Service Any device not in safe operating condition such as, but not limited to, excessive leakage, missing rollers, pins, or fasteners, any bent or cracked structural members, cut or frayed electric, hydraulic, or pneumatic lines, damaged or malfunctioning controls or safety devices, etc.
(OSHA 1910.178 29QFR-7-1-06 Edition) Presto lifts does not offer operator training. Operator training programs may be offered by your local Presto Lifts dealer or obtained online. Enter, "powered industrial truck operator training" into a search engine.
Page 7
DO NOT OPERATE THESE LIFTS WITHOUT CARE- gency occurs. FULLY READING THIS MANUAL. In order to provide for the safe operation of these stackers, Presto Lifts Inc. Tipovers and falls are very serious accidents; you can be has identified certain hazards that may occur during the crushed or even killed.
3 1/2 inches. This measurement is from the floor, to the top of the front tip of the forks. If higher fork adjust- ment is needed or if there are questions contact Presto Customer Service at 800-343-9322.
Always make sure that when entering the pallet that carrier and your Presto dealer immediately. the forks are in the fully lowered position. Be careful when lifting pallets that are too short or too long for the stacker.
As standard equipment, a horn that is located on the top of the handle. AUTHORIZED OPERATORS SHOULD READ AND UNDERSTAND ALL INSTRUCTIONS, PRECAUTIONS AND WARNINGS. IMPROPER USE OF THIS LIFT TRUCK COULD RESULT IN INJURY AND/OR DAMAGE TO LOAD AND EQUIPMENT. PRESTO OWNER’S MANUAL Page 10 POWER STAK PPS2200-62 NFO-27...
5. Check Brake Function OPERATOR ID ______________________________________ DATE ______________________________ DO NOT USE OR OPERATE STACKER IF ANY FUNCTION IS NOT OPERATING PROPERLY OR IF STACKER APPEARS UNSAFE IN ANYWAY REPORT CONCERNS TO SUPERVISOR IMMEDIATELY! PRESTO OWNER’S MANUAL Page 11 POWER STAK PPS2200-62 NFO-27...
IF BDI IS SHOWING RED BARS BATTERY IS DISCHARGED TOO FAR - CHARGE IMMEDIATELY VOLTAGE Approx. 12.7 V Fully charged Approx. 12.2 V 1/2 charged Approx. 12.0 V 1/4 charged Approx. 11.6 V Discharged PRESTO OWNER’S MANUAL Page 12 POWER STAK PPS2200-62 NFO-27...
CABLES; WIRES: Check that there are no loose cables MAINTENANCE or wires. LABELS: Ensure all precautionary labels and guards are Operation of Presto Power Stak is very simple — as is in place. their construction. They require very little maintenance. Reasonable care will result in excellent trouble-free perfor- MONTHLY OPERATIONS mance.
¨ Loose or dirty battery connections ¨ Blown fuse(s) • Faulty wiring from fuse to travel control switch • Faulty control switch • Faulty wiring from travel control switch direction con- tactor • Faulty contactor PRESTO OWNER’S MANUAL Page 14 POWER STAK PPS2200-62 NFO-27...
Snap Ring Spindle Seat Spindle Collar Bearing Air Spring Bolt Fixing Shaft Spring Washer Control Handle Washer Anchor Handle Fixing Board Control Pod Bolt Bolt Collar Spindle Flat Key Lock Nut PRESTO OWNER’S MANUAL Page 18 POWER STAK PPS2200-62 NFO-27...
Page 19
Control Handle Bolt Anchor Handle Spring Washer Control Pod Washer Bolt Fixing Board Flat Key Bolt (Tiller arm Pivot up/down) Washer Collar Spindle (Tiller arm Pivot up/ down) Washer Lock Nut PRESTO OWNER’S MANUAL Page 19 POWER STAK PPS2200-62 NFO-27...
Seal Dust Cover Ring Gear Shaft Gear Wheel Bearing C Clip C Clip Seal Electric Brake Ring Bearing Traction Motor Dust Ring C Clip Screw Gear Screw Screw Spacer Flange Panel PRESTO OWNER’S MANUAL Page 20 POWER STAK PPS2200-62 NFO-27...
MODEL REFERENCE CAGE CODE SCALE DIMENSIONS ARE IN PowerStak INCHES 80006 PROJECT: EL POWER STAK BATTERY CONN DIAG 24VDC USE OF PROPRIETARY INFORMATION LIMITED TO WRITTEN AGREEMENT TITLE: SIZE DWG. NO. PRESTO OWNER’S MANUAL Page 29 POWER STAK PPS2200-62 NFO-27...
Ordering Replacement Parts Presto Lifts has carefully chosen the components in your unit to be the best available for the purpose. Replacement parts should be identical to the original equipment. Presto Lifts will not be responsible for equipment failures resulting from the use of incorrect replacement parts or from unauthorized modifications to the unit.
Should you feel there is a quality problem, please contact the seller to ask questions and gather information on how to rectify the issue. Presto Lift Inc. reserves the right to determine potential credits, as a result of factory defects, based on its inspection of the merchandise.
Presto Lifts. Customers shipping returns from the Continental US, Canada, or Mexico have thirty (30) days from date of RMA issue to have the product arrive at Presto Lifts’ facility. All merchandise must arrive Free on Board at Presto Lifts’ facility or the shipment will be refused and returned to the sender.
Need help?
Do you have a question about the Power Stak PPS2200-62NFO-27 and is the answer not in the manual?
Questions and answers