Timer Operations
Temporarily deactivating the wake up
timer
You are only able to activate the Snooze
function within 30 minutes after the timer wakes
up from standby mode.
1
After timer wake up, press SNOOZE on the
remote.
➜
The system will switch to standby mode for
five minutes. After that, it resumes the last
selected source again.
2
To cancel the snooze function, press SNOOZE
again.
Sleep timer setting
The sleep timer turns the system to Eco Power
standby mode at a preselected time.
1
Press SLEEP repeatedly until it reaches the
desired preset turn-off time.
➜
The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™
OFF ™ 15 ...
➜
is shown, except for "OFF" mode.
SLEEP
➜
To view or change the setting, repeat the
above.
2
Before the system switches to Eco Power
standby mode, a countdown of 10 seconds is
displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
To cancel th
e sleep timer
●
Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON B button.
24
Other Connection
Listening to an external source
You can listen to the sound of the connected
external device through your system's speakers.
1
Use the red/white audio cables to connect the
system's AUX/CDR IN (R/L) terminals to the
AUDIO OUT terminals on the other
audio / visual device (such as a TV, VCR, Laser Disc
player, DVD player or CD recorder)
➜
If the connecting device has only a a single
audio out terminal, connect it to the AUX/CDR
IN left terminal. Alternatively, you can use a
"single to double" cinch cable, but the output
sounds still remain mono.
2
Press AUX repeatedly.
➜
Select "AUX" when connecting to a TV, VCR
or Laser Disc player.
➜
Select "AUX/CDR" when connecting to a CD
recorder or DVD player.
3
Press PLAY on the connected device to start
playback.
Notes:
– All the sound control features (DSC, VEC for
example) are available for selection.
– Always refer to the owner's manual of the other
equipment for complete connection and use
details.